Toner Cleaning Workstations

MIS Toner Plus

MIS Toner Plus Cleaning Workstation

Features at the First Glance

MIS Toner Plus is an advanced toner workstation. You can clean and refill all toner cartridges available in the market.

Thanks to its superb filtration system powered by “High Efficiency” filters, all fine dust including toner powder is kept enclosed.

“High Efficiency” filters are industry leaders because they can strain up to 0.3 micron. As we consider the average particle size of toner dust ranging between 0.5 and 0.7 micron, it is guaranteed that toner dust is kept enclosed inside the system instead of floating in the air.

“High Efficiency” filters used in MIS Toner Plus strains all fine dust at %99.97 efficiency rate.

 

Easy-to-Use Control Panel

MIS Toner Plus is equipped with an easy-to-use control panel.  With the switches mounted on the control panel, you can start the illumination and the engine to vacuum and clean the toner dust.

Automatic Sliding Cabinet Door

MIS Toner Plus has an automatic slider door.   So you can adjust its height according to how tall you are.  Furthermore, it is equipped with obstruction control system.  Therefore, while you are lowering down the door, the risk for your arms or hands being jammed between the cabinet door and closed hood is eliminated.

Spacious and Illuminated Closed Hood

With the spacious closed hood, you can clean and refill all toner cartridges in comfort.

In addition to the florescent lamp inside the closed hood, thanks to the windows at the sides, illumination is not a problem in MIS Toner Plus.

 

Superior Cleaning with Airgun

MIS Toner Plus has an air gun installed in the closed hood.   It is used to blow pressurized air in cleaning toner cartridges.   It is not an electronic appliance and powered by the external air compressor unit.

 

Useful Accessories

In order to ease the assembling and dismantling toner cartridges, MIS Toner Plus is also equipped with an air screwdriver.   Its revolving speed and direction can be adjusted easily not to damage the screws mounted on toner cartridges.

 

Waste Disposal

Trash bag is connected to waste channel, located at the right hand side of the machine.

 

Anti-Coagulant Air Blowing System

The last but not the least, MIS Toner Plus is also equipped with an air dryer or air filter.   It is used to remove the water particles (humidity) from the blown air.   And, it prevents toner powder from getting lumpy.

 

Features

 

  • Cleans and refills all toner cartridges.
  • Sophisticated filtration system powered by industry leader “High Efficiency” filters.
  • “High Efficiency” filters strain fine dust including toner powder up to 0.3 micron at %99.97 efficiency rate.
  • When it is considered that the average particle size ranges between 0.5 and 0.7 micron, MIS Toner Plus is the ultimate solution to clean toner cartridges.
  • Provides a spacious and illuminated closed hood to clean and refill toner cartridges.
  • Therefore, you don’t need to carry toner cartridge from one place to another during cleaning and refilling process.
  • Electronic check-board safeguards the entire system and halts the operation in case of malfunctions or shortcuts.
  • MIS Toner Plus comes with an external air compressor unit to produce pressurized air blow.
  • Air gun provides a smooth and fine cleaning of toner cartridges.
  • MIS Toner Plus comes with an air screwdriver to ease assembling and dismantling toner cartridges.
  • Air drill is also offered when it is needed to drill toner cartridges.
  • Air de-ionizer neutralizes the electrical loads of the toner powder.
  • MIS Toner Plus has very low operation costs. “High Efficiency” filter is replaced in each 5,000 cartridge cleanings.

 

Power Unit

 

  • 220V – 50 Hz.
  • 1.4 Amp
  • 0.18 Kw
  • 2,280 rpm

 

Filtration System

 

  • Dust Collector – 2 units
  • “High Efficiency” Filters

 

Body

 

  • Aluminum Body
  • Electro-Static Painting

 

Package Contents

 

  1. MIS Toner Plus Toner Cleaning Workstation
  2. External Air Compressor Unit
  3. Air gun
  4. Spare Dust Collectors (2 Units)
  5. User Manual

 

Shipping Information

 

  • We process orders after receiving paid order confirmation.
  • We accept T/T and Western Union.
  • Production time is 20 business days.